Utility
This end to end fiber transmitting equipment which is intended on big level included circuit realizes 1-4E1 circuit,1 channel 10/100M Ethernet,1-8 channel voice phone and 1-4 channel RS232.Its qualities comprise complete warning function high integration, low consumption, stable concert and convenient usage.For this device.
Structure of Multiplexer |
Features
1. provides 1-4channel E1/G.703;
2. provides 1 channel 100M (liner) Ethernet ports
3. provides 1-8 channel voice port,E&M 4wire;
4. provides 1-4 channel RS232,rates upports 300-115200 bps;
5. Ethernet port 10/100M,full/half duplex auto-adaptable and supports VLAN;
6. Ethernet ports upports AUTO-MDIX (twisted cable and straight cable auto-adaptable);
7. 1-8 channel voice connection supports calling indication;
8. Configuration:point to point;
9. Optical interface supports SC/FC interface
Optical interface
Optical wave span solitary mode 1310nm/1550nm
Fiber single fiber or twice fiber for option
Transmitting consumption 9dBm/-5dBm
Transmission range 0-120Km for option Optical interface SC/FC
Receiving and dispatching module >-6dBm
Optical receiver receiving sensitivity <-36dBm(BER<10-11)
Fiber circuit code NRZcode
FXS Telephone Port
Ring voltage 75V
Ring frequency 25HZ
2 line input impedance 600Ω (hanging off)
Wastage 40db
Ring voltage 75V
Ring frequency 25HZ
2 line input impedance 600Ω (hanging off)
Wastage 40db
FXO Exchange Port
Ring detecting voltage 35V
Ring detecting frequency 17HZ-60HZ
2 line input impedance 600Ω (hanging off)
Wastage 40db
Ring detecting voltage 35V
Ring detecting frequency 17HZ-60HZ
2 line input impedance 600Ω (hanging off)
Wastage 40db
2/4 wire E&M interface card
Channel quantity per card 2
Standard referred to ITU-TRECG.714
Transmit relative level +3,0, -3dBr adjustable
Receive relative level +3,0, +3dBr adjustable
Signaling mode E&M
Interface impedance 600Ω
Subscriber physical connector RJ45
Channel quantity per card 2
Standard referred to ITU-TRECG.714
Transmit relative level +3,0, -3dBr adjustable
Receive relative level +3,0, +3dBr adjustable
Signaling mode E&M
Interface impedance 600Ω
Subscriber physical connector RJ45
E1 interface
Standard conforms to G.703 standard Line
Speed 2.048MHz±50PPM
Code HDB3
Impedance 75Ω unbalanced
Connector BNC 75Ω
Vibration characteristic satisfies G.742 and G.823 standard
10/100Base-Tport
Rate 10M/100M full/half duplex auto-adaptable
Protocol supportsIEEE802.3, IEEE802.1Q(VLAN)
MAC address can learn 4096 MAC address
Physical interface RJ45,supports AUTO-MDIX(twisted cable and straight cable auto-adaptable)
RS232port
Rate 300-115.2Kbps auto-adaptable (Asynchronous)
Interface characteristic SatisfiesITU-TV.24standard
Connector RJ45
Physical Dimension
Desktop 483(width)*138(depth)*44(height)mm
Operation Condition
Voltage AC180V~260V DC–48V;DC+24V
Consumption ≤5W
Operating temperature 0°C~50°C
Storing temperature -40°C~+70°C
Relative humidity 95%
No comments:
Post a Comment